The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LP8863-Q1: LP8863 SCH design change

Part Number: LP8863-Q1

Hi Team,

There is a good new that we DIN TI LP8863ADCPRQ1!

Regarding the GD pin of LP8863, a resistor and a capacitor are connected to the ground. Can the RB7 resistor be replaced with 15 ohm?
CB24 is changed to 470pf , what effect will this have on the line?

Vmax:26.36V-LED OPEN
Vmin:5.11V-LED min
4V x 6LED =24V