Hi, customer raised up a question on the silicon revision C0 vs C1 and wondered what that means as well as if that affects any functionality of the parts.
Here are the details:
DC 2102, Die Rev. C0 From RFB
DC 2117 Die Rev. C1 From DM6
I searched around the PCN and found below one from mouser mentioning there are 2 different fab site (RFB and DM6). Not sure if that's the cause for C0 vs C1:
https://www.mouser.com/PCN/Texas_Instruments_PCN20181018000_2018101816181042.pdf
Please kindly advise and much appreciated for your time.
Thanks,
Miranda
