TPS25982: Use external signal for EN/UVLO

Jim Tsai

Expert 4470 points

Part Number: TPS25982

Hi,

Can I use external signal for EN/UVLO?

Any sequence requirement?

over 2 years ago

0 Kunal Goel over 2 years ago

TI__Guru 50335 points

Hi Jim,

Yes you can use external signal. Just make sure that signal amplitude is within recommended pin voltage. To turn on device give voltage greater than 0.99V and to turn off less than 0.92V.

Regards

Kunal Goel

+1 Kunal Goel over 2 years ago in reply to Kunal Goel

TI__Guru 50335 points

Hi Jim,

Let me know if any further query, closing thread for time being.

Regards

Kunal Goel

Power management

Power management forum

TPS25982: Use external signal for EN/UVLO