Other Parts Discussed in Thread: TPS25947, TPS2596
Hello,
I am using TPS25910RSAR on my design. To limit the output current, I have a resistor (110K) connected to the LIM pin and GNG. My desired maximum current limit is 1.75A. Higher than this will cause heating up my DC to DC converter (TPS562200DDCR) and consequently thermal shutdown.
Our desired min current value is 1.5A and the max value is 1.75A. according to the datasheet, I think that's impossible to maintain the range! Do you have a solution to fulfill our requirements? we need to stay between 1.5 to 1.75A.
Many thanks,
Jafar