• State
  • Locked Locked
  • Replies 0 replies
  • Subscribers 61 subscribers
  • Views 183 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[FAQ] Does the TI Fusion GUI provide a general purpose PMBus or I2C tool?

Sam
Intellectual 2895 points

Yes, the SMBus & SAA Tool allows you to communicate to any I 2C or PMBus device. The tool can be launched from either:

• Fusion Digital Power Designer GUI (Tools → SMBus & SAA Tool)

• Fusion Digital Power Designer → Tools → SMBus & I2C & SAA Debug Tool

For more FAQ please check the following document.

UCD90xxx Family Frequently Asked Questions and Answers