• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 62 subscribers
  • Views 95 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCC12050: Added Section number included

Dice-K
Mastermind 6330 points
Part Number: UCC12050
Other Parts Discussed in Thread: UCC12040,

Hi support team,

Please let me know the meaning of "Revision History" of SNVSB38D.

Page-17: Added Section number included.

Does that mean the position in section 7.4 has moved?

Regards,
Dice-K

  • +1
    TI__Mastermind 20875 points

    Dice-K

    Nothing related to the UCC12050 SEL function was changed. All functional modes shown in Table 7-1 (section 7.4) are consistent and applicable to UCC12040 and UCC12050 and have been the same since the fi4rst revision of this IC was released at APL (Advanced Product Launch). The revision history comment you highlighted (Added section number included) is related to a new section that was added to the data sheet after its initial release. In this case, I added section 7.3.7 to describe a bit more about the internal spread spectrum modulation and EMC considerations.

    Regards,

    Steve M

  • 0 in reply to Steven Mappus1
    Mastermind 6330 points

    Hi Steven,
    Thank you for your reply.

    Section "7.3.3 VISO Load Recommended Operating Area" has been added in revision B.
    As a result, section 7.3.7 was generated. (The section number has shifted.)

    Best regards,
    Dice-K