• State
  • Locked Locked
  • Replies 0 replies
  • Subscribers 62 subscribers
  • Views 309 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[FAQ] Why is the invalid logs flag not cleared? UCD90xxx

Sam
Expert 4175 points
Other Parts Discussed in Thread: UCD90120A, UCD9090, UCD90160A, UCD90160, UCD90240, UCD90320U, UCD90120, UCD9090A, UCD90124, UCD90124A, UCD90320

The Invalid Logs flag is cleared only on the next boot up if the device does not see any corrupted logs. The Hardcoded Parms flag has the same behavior. This flag is set when the device detects that your configuration data is corrupted and is only cleared when the device detects a complete your configuration on the new boot up.

For more FAQ please check the following document.

UCD90xxx Family Frequently Asked Questions and Answers 

UCD9090 UCD9090A UCD90120 UCD90120A UCD90124 UCD90124A UCD90160 UCD90160A UCD90240 UCD90320 UCD90320U