Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
A related question is a question created from another question. When the related question is created, it will be automatically linked to the original question.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Can anyone advise whether the EN pin connection in the below schematic is acceptable? I'm using a 10k pull-up resistor to pull EN to 3.3 V to turn on the switcher and a FET to pull it to ground to disable the part. Thanks!
