The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCC2813-2: ucc2813-2 during start Up

Part Number: UCC2813-2
Other Parts Discussed in Thread: UCC38C43

With a large output Capacitance, can hiccup current limiting be avoided during start up with  the UCC2813 device?  Using the UCC38C43 part, it   takes approx 12ms to rise from 0V to regulation point.

In my simulation, hiccup operation results in non monotonic start up. Can this be avoided? e.g. by using  an external soft start circuit to avoid the internal 4ms limit (only during initial start up)