Hi TI Expert,
For below auto-retry implementation, when OC happens, the fault is pulled low and 0.22uF cap will be discharged through FAULT pins.
Is there any pull-down resistance to limit the discharge current?
Thanks
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi TI Expert,
For below auto-retry implementation, when OC happens, the fault is pulled low and 0.22uF cap will be discharged through FAULT pins.
Is there any pull-down resistance to limit the discharge current?
Thanks