Other Parts Discussed in Thread: LM25149
Hi, team
Do we have min and max deadtime value for LM25149? Cause I only see there is typical value on datasheet.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi, team
Do we have min and max deadtime value for LM25149? Cause I only see there is typical value on datasheet.
Hi Mona,
The deadtime is adaptive, the controller looks for SW node voltage to fall before turning on LO.
The minimum deadtime will be related to SW node parasitic capacitance and SW current, and how long SW takes to fall.
The maximum deadtime is ~40ns, after which LO will be turned on.
Hope this helps,
-Orlando