Would there be an issue on this device if Pin 2 (NC) was connected to Vin and Pin 7 (NC) was connected to Vout? Assuming it's alright since the NC pins are not internally connected, but are there any drawbacks?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Would there be an issue on this device if Pin 2 (NC) was connected to Vin and Pin 7 (NC) was connected to Vout? Assuming it's alright since the NC pins are not internally connected, but are there any drawbacks?
Hi Domenick,
It is fine to do this. There is normally more ground copper on the board than the other nets, so that is why we recommend connecting NC pins to ground.
Regards,
Nick