In Trigger-Mode, is it OK to set Window 1 to zero in order to prevent possible "early trigger errors"? I'm uncertain as setting RT[6:0] to zero, would produce a negative result to:
tWIN1_MIN = [(RT[6:0] – 1) × 0.55 × 0.95] ms
Marcus
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
In Trigger-Mode, is it OK to set Window 1 to zero in order to prevent possible "early trigger errors"? I'm uncertain as setting RT[6:0] to zero, would produce a negative result to:
tWIN1_MIN = [(RT[6:0] – 1) × 0.55 × 0.95] ms
Marcus