Hi support team,
For this Buck , what is the EN pin sourcing pullup current for calculating Rent resistors for regulating the enable pin, with voltage divider. It is specified as a small current! what would be the range or value for Ip.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi support team,
For this Buck , what is the EN pin sourcing pullup current for calculating Rent resistors for regulating the enable pin, with voltage divider. It is specified as a small current! what would be the range or value for Ip.
Hi Sowmiya,
The sourcing current is about 1.5 uA when Ven=1.1 V and about 11.6 uA when Ven=1.3V.
Hope this helps.
Regards,
Yitzhak Bolurian
Hi sir,
The values for Ip and Ih is still in a dilemma, as it is not mentioned for either pullup or hysteresis ( it is been simply denoted as EN pin sourcing current)
May i know the value for pullup current sir (Ip)