I'm looking to use the LM26420 in a design. The input voltage will be from 3.0V to 4.2V and I would like the output voltage to be 3.3V. Will this part work for my design requirements?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
I'm looking to use the LM26420 in a design. The input voltage will be from 3.0V to 4.2V and I would like the output voltage to be 3.3V. Will this part work for my design requirements?
Hi Brenton,
The 3.3V Vout is possible from a 3V to 4.2V supply. But depending on the losses on the board and the passives used there could be slight variations on the efficiency. I recommend to test this use case before actual implementation.
Is a dual buck converter necessary for your application? If not, we could look into alternative newer solutions.
Regards,
Febin
Hi Brenton,
Do you need any further support on this issue? If not, I will go ahead and close this thread. Please feel free to reopen this thread if you have further questions.
Regards,
Febin