TPS53015: About the diode in evaluation modules

Qi Liu

Part Number: TPS53015
Other Parts Discussed in Thread: , TPS51215A, TPS51916

Hi, support team

My customer has the questions as follow:

There's an D1 BAT54XV2T1 in TPS53015EVM-126.
According to the follow post, I know that it clamps the negative voltage on the SW pin and it's best not to be removed.
e2e.ti.com/.../3666716

In addition to TPS53015, we also discussed the circuits using TPS51215A and TPS51916.
However, in the circuit diagrams of the user's Guide (sluuc 79, slu526) of the evaluation modules of TPS51215A and TPS51916,
the diode equivalent to D1 of TPS53015 can not be found.
Why?

Thanks so much.

Best regards,
Yuki

over 2 years ago

0 Miranda Gu over 2 years ago

TI__Genius 14827 points

Hi Yuki,

Our US team will check this and reply you soon.

+1 Alec Biesterfeld over 2 years ago

TI__Expert 5310 points

Hi Yuki,

The TPS53015 has a SW node minimum voltage of -1V. The TPS51215A and TPS51916 both have a minimum rating of -5V at the SW node. Due to this lower rating of the minimum SW node voltage with the TPS53015, a diode clamp is recommended. In the case of the TPS51215A and TPS51916, there is much more margin in the design for SW node undershoot and a diode clamp is not necessary in that case.

Regards,

Alec Biesterfeld

Power management

Power management forum

TPS53015: About the diode in evaluation modules