This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ATL431: Feedback resistor value

Part Number: ATL431

Hi Team,

Example values of Feedback resistor(R1 and R2) are 10kΩ in the data sheet.

1) Is it OK to R1=33kΩ and R2=100kΩ?
2) Do R1 and R2 have upper limit and lower limit?
3) How should we decide which several hundred Ω or several ten Ω is better?

Best Regards,