• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 178 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ40Z50-R4-DEVICE-FW: bq40z50-r4

Cherry Zhou
Mastermind 22235 points

Part Number: BQ40Z50-R4-DEVICE-FW

Hi team,

Issue: The customer would like to know when using the BQ40Z50-R4 chip for a charging experiment, how to see the equalization? They cannot see it from the figures below:

Could you help resolve this case? Thanks.

Best Regards,

Cherry

  • 0
    TI__Guru** 102435 points

    Hello Cherry,

    If equalization is meant as cell balancing, they can view if cell balancing is active in the R4 firmware by checking the CBStatus bit for cell balancing times and which cells are being balanced.

    Sincerely,

    Wyatt Keller