• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 234 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS717: Formula in Datasheet seems to be wrong

Daniel Stach
Prodigy 10 points
Part Number: TPS717

Hi,

i faced dificulties to calculate to proper resistor values for a given output voltage. In chapter 8.2.1.2 the author of the datasheet stated the formula: R1=R2(Vout/(Vfb-1)), which doesn't corresponds to the table listed below. I think the formula should look like R1=R2(Vout/Vfb-1). Maybe just a typo?

Best regards,

Daniel