LMR14006: Different font style on body marking

Grace Tan

Part Number: LMR14006

Hi TI Team,

can you please check and advise if this is normal ?

Same MPN, Same COO - MY, different Datecode, but font style on body marking shows differently for the number "1"

0 Elena Gao over 3 years ago

hi,

from TI datasheet top mark of LMR14006 show as below, please check if you have the right part number.

thank you.

Elena

0 Grace Tan over 3 years ago

yes, but these are the back markings

0 Elena Gao over 3 years ago in reply to Grace Tan

so on the top is the same ,right ?

0 Grace Tan over 3 years ago in reply to Elena Gao

yes, this is the top marking.

+1 Elena Gao over 3 years ago in reply to Grace Tan

It's should be good since the top mark is right.

Back mark not stand for part number, it is related to production data , will differ by different tester type, assembly lot code.

Elena

0 Grace Tan over 3 years ago in reply to Elena Gao

thank you for your clarification, but different Font Style will not raise any issue ?

0 Elena Gao over 3 years ago in reply to Grace Tan

what kind of issue do you have now ? is it your production request visual check ?

Elena

0 Grace Tan over 3 years ago in reply to Elena Gao

yes, they realized same MPN but different style format for the number one. "1"

0 Elena Gao over 3 years ago in reply to Grace Tan

thank you Grace, I understand your concern, the function should be same with no issue,

BTw, is it get sample from TI store, or other distribution, same vendor ？

Power management forum