3S (12.6V) Li ion battery charger design with following specs and Component values
Vin =16V
RSNS=0.1R
R(ISET1)=9K75
R(ISET2)=20K
I am not using NTC so the TS PIN voltage divider resistors are 10K,10K Respectively
PG LED =ON(GLOWING)
STAT1 LED= Constant upto Battery charger till12v44 and then start Blinking continuosly
STAT2 LED= OFF all the time
I want to charge my Battery upto12V6 and want my STAT2 LED = ON(GLOW)
STAT2 LED= 0FF
Please suggest me the problem why It's not charging after 12v44
