Here's some issues from the customer may need your help:
1. (3.6V Li-Thionyl Chloride) Using Lithium Primary Battery, metering chip BQ35100 (3 Modes Included, Accumulate, SOH, EOS, according to datasheet, EOS is designed for Li-Thionyl Chloride).
2. What are the steps for using firmware of BQ35100? Is fuel training required? (they are going to use EOS)
3.Regarding Li-Thionyl Chloride, is there any recommended chip for this battery with a lower power consumption (industrial field use)?
Could you help check this case? Thanks.