• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 222 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS62740: Simulation on WEBENCH with different Inductor and Capacitor values

Vinayak Potadar
Prodigy 200 points
Part Number: TPS62740

Dear TI,

We are currently using TPS62740 IC in our Device. We have communicated with TI team and they suggested to use higher values of Inductor(3.3uH) and capacitor Cout(22uF) and We have done simulation on WEBENCH on TI's website and got the results and we have got Efficiency for both circuit and found that with higher Inductor(3.3uH) and Capacitor (22uF) values we are getting Higher Efficiency. Now we want to check  the same DC-DC with PI filter on WEBENCH which is suggested by TI team. how can we add PI filter in it. I have attached the values of PI filter (L1=600ohm) .

Please Help ASAP.   

.  

Thanks in Advance.

Regards,

Vinayak P