Hi Team,
A title, if I want to set EVM config to single output, two phase. Should I modify the red connection only? If there is any part that I need to modify, please let me know. Thank you.
Roy
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
A title, if I want to set EVM config to single output, two phase. Should I modify the red connection only? If there is any part that I need to modify, please let me know. Thank you.
Roy
Hi Roy,
You can remove the COMP2 compensation network and connect the jumper that ties the two outputs together. Also, use the quickstart calculator to verify your design, especially in terms of compensation (remember to derate the ceramic output cap value for voltage as needed).
Regards,
Tim