Hi, TI Support Team
A request for circuit and layout review for the following parts has been received from a customer.
Part name: TPS2051CDBVR
Please reply after reviewing the attachments below.
Thanks.
Regards,
MJ
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi, TI Support Team
A request for circuit and layout review for the following parts has been received from a customer.
Part name: TPS2051CDBVR
Please reply after reviewing the attachments below.
Thanks.
Regards,
MJ
Hi MJ,
Looks fine. But suggested to add another 0.1uF cap close to output pin.
For TI's policy, I will first click resolved button.
If you have any other concern, contact me any time.
If you think resolved, please help click 'Issue is solved button'.
Thanks.
Hi MJ,
I think you can delete the threshold.
I can't delete it from my side.
If you can't delete it, please contact me.
For TI's policy, I will first click resolved button.
If you have any other concern, contact me any time.
If you think resolved, please help click 'Issue is solved button'.
Thanks.