Hello team e2e,
I would like to know if there is a better C driver for BQ25792 charger.
I found the Linux one here - https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1048302/bq25792-sample-i2c-code/3879112?tisearch=e2e-sitesearch&keymatch=Bq25792%20driver#3879112. But I am looking for better initialisation sequence for setting up temp limit, cell numbers, time out, retry, I2C registers etc.
Thanks,
Anubha