Customer wants to check if it's ok to do below?
I also wondering if internally it's open or not, thx for verify!
pin5 leave floating
pin 6 short to output
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
This depends on the package that the customer is using.
RWT: pin5 floating would work
pin6 floating would work
DRL: pin5 floating would not work as a connection to an external feedback devider is necessary
pin6 connection to output would work
PDRL: pin5 floating would not work as a connection to an external feedback devider is necessary
pin6 if not being used leave floating and not shorted to output
All information in this correspondence and in any related correspondence is provided “as is” and “with all faults”, and is subject to TI’s Important Notice (http://www.ti.com/corp/docs/legal/important-notice.shtml)
Customer also wants to double check in RWT package, pin 5,6 NC must connect to same thing? Can they do different connection?
Like one floating, the other one connecting with Vout?
please kindly verify for customer, thanks!