TPS650330-Q1: TPS65033208-Q1 reset command affect scope

JeongHeon Lee

Part Number: TPS650330-Q1

During the reset sequence by reset command, will voltage rails loose their voltages? or only PMIC MCU and registers are being reset?

over 2 years ago

0 Gerard Copeland over 2 years ago

TI__Genius 10200 points

Hi,

The reset command will send the device to the RESET state. In this state the PMIC rails will lose their voltages as the PMIC disables the outputs, waits for them to discharge, and attempts to power up again.

Thanks,

Gerard

Power management

Power management forum

TPS650330-Q1: TPS65033208-Q1 reset command affect scope