Because of the Thanksgiving holiday in the U.S., TI E2E design support forum responses may be delayed the week of Nov. 21. Thank you for your patience.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS73801-SEP: EN-pin threshold - wrong vertical axis labelling for figure 11 and 12

Part Number: TPS73801-SEP
Other Parts Discussed in Thread: TPS73801


I'm guessing a wrong vertical axis labelling for figure 11 and 12, which makes EN-pin threshold voltage spec confusing.

By comparing TPS73801 revC and TPS73801-SEP revA datasheet,
it looks like vertical axis for figure 11 and 12 of TPS73801-SEP datasheet should be "EN threshold Voltage" (V) rather than "SHDN Input Current (μA)"

By the way, vertical axis scale of 0.1V would be easier to read.

Can you confirm ?

  • Thierry,

    Yes, this is an error.  Figures 6-11, and 6-12 should be labeled EN input voltage (V) for the typical enable plots vs temperature.

    Thank you for pointing this out.

    I will get this in queue to be updated.

    If this answers your question, please click "This Resolved My Issue"