This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS61178: Question Asking

Part Number: TPS61178

Hi team,

My customer have some question on TPS61178.

CH1 Vin; CH2 Vout; CH3 SW ;CH4 EN

Below is the test specification:

Vin: 4V

Vout:5V

Iout: 2.5A

Frequency:1MEG HZ (steady state)

When the system start up,  customer see the SW waveform is discontinued (red circle), is this normal? what's the root cause to make this phenomena.