Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 66 subscribers
  • Views 147 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS54294: Only using one output

Daniel Brock
Prodigy 30 points
Part Number: TPS54294

Hello TI,

I am using several TPS54294's in a design, and one of them will only utilize one channel output.

I am pulling the enable low on the unused channel, but what should I do with the SW/VFB/etc,,, pins. Can these be NC or grounded?

Thanks for your time!

Best,

Dan B