CSD87350Q5D: CSD87350Q5D

Moshe Haviv

Prodigy 105 points

Part Number: CSD87350Q5D

Hi Ti,

I what to use CSD87350Q5D FET but this part not supports REACH compliance.

Could you please recommended a replacement for this FET that supports RoHS/REACH Cert/Halogen-Free/Low?

Thanks,

Moshe

over 2 years ago

0 John Wallace1 over 2 years ago

TI__Mastermind 29525 points

Hello Moshe,

Thanks for your interest in TI FETs.The CSD87350Q5D uses leaded solder for the internal interconnect to the silicon die. This is common practice for TI and other power MOSFET vendors. You can access the material content for this device under Ordering and quality section in the product folder and clicking on View or download under quality, reliability and packaging information. With regards to REACH affected status on the web:

Parts with Pb die attach will show status as Affected.
Affected is TI’s interpretation of cases where a REACH SVHC exceeds the threshold defined by REACH, which then obligates TI to notify customers of the presence of that material. There is no “fail” or “Out of compliance” status for REACH SVHC materials. REACH SVHC materials are not banned or restricted.

Below is a link to a technical article explaining which TI FET packages use lead in the interconnect.

https://e2e.ti.com/blogs_/b/powerhouse/posts/what-does-a-lead-free-power-mosfet-really-mean

We have no plans to change the interconnect for our power block FETs such as the CSD87350Q5D. Please let me know if I can be of any further assistance.

Best Regards,

John Wallace

TI FET Applications