• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 91 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

CSD87381P: Design Query

CSD87381P: Layout spec of CSD87381P

Feng bin Su
Expert 7510 points
Part Number: CSD87381P

Hi team,

There are two kind of layout spec for out CSD87381. Could you kindly  help to confirm the difference between them? Thanks,

  • 0
    TI__Mastermind 29505 points

    Hello Ben,

    Thanks for the inquiry. I checked with our SMT expert. His response is given below. Please let me know if I can be of any further assistance.

    There is only one PCB land pad with two stencil options. Normally customer use 0.1mm thick stencil. Since this device is for power application, some customer may use a thicker stencil for other devices. So we also provide a thicker stencil option with adjusted aperture to compensate for the thicker solder paste.     

    Best Regards,

    John Wallace

    TI FET Applications