The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPSM82823: Cout Value

Part Number: TPSM82823

Hi team,

 

On section 9.2.1.2.3 of the datasheet, it is recommended to have Cout in the range of 10uF-47uF.

Is it for the output capacitors which is placed closed to the IC (such as C2+C3 on Figure 11-2), or does it include bypass capacitors on latter stage?

 

Best regards,

Kurumi