Hi Expert,
If customer no use Li & Lo of Low side MOSFET, can we just let both PIN floating?
Regards,
Mark
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Expert,
If customer no use Li & Lo of Low side MOSFET, can we just let both PIN floating?
Regards,
Mark
Hi Mark,
If the low side driver is not used, it is best to ground the LI pin to avoid any noise getting coupled into LI. LO is ok floating.
Regards,
Leslie