• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 174 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ24160: as a Buck DC/DC converter

Yoshinobu Kagawa
Expert 1970 points
Part Number: BQ24160

I want to use the bq24160 as a Buck DC/DC converter from DC input only for a device that has no battery and is not powered by the USB power input.
Is there any problem ?

Regards,
Kagawa

  • 0
    TI__Guru*** 149885 points

    Hi Kagawa-san,

    No problem.  I recommend disabling charge when operating without a battery.  Please note that compared to a typical dc/dc converter, the charger's transient response is not as good as we expect the battery to be present to assist with supplement mode.

    Regards,

    Jeff