Hello E2E,
Is there any concern if we have Vsense on before VCC is applied for TPS3897? Or are we okay as long as table 7.3 is met regardless of if the device is powered or not?
Regards,
Russell
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello E2E,
Is there any concern if we have Vsense on before VCC is applied for TPS3897? Or are we okay as long as table 7.3 is met regardless of if the device is powered or not?
Regards,
Russell
Hi Russell,
Thank you for your question, for the TPS3897, the SENSE pin is independent from the VCC so you should be fine with the Vsense up before VCC.
Jesse