Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 64 subscribers
  • Views 280 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS62067-Q1: Question about changing TLV62065-Q1 to TPS62067-Q1.

CHO SR
Genius 3415 points
Part Number: TPS62067-Q1
Other Parts Discussed in Thread: TLV62065-Q1

Hi,

The customer is considering changing TLV62065-Q1 to TPS62067-Q1.

Please review whether TPS62067-Q1 can be used for the existing schematic.

[TLV62065-Q1 Schematic]

Q1. Do not use the PG function of the MODE/PG pin.

Is pull-up resistance essential when connecting to AVIN?

  • 0
    TI__Genius 15290 points

    Hi,

    It is essential to applied voltage on PG pin lower or equal to AVIN.  Datasheet suggest to have pull up resistor to adjust the voltage to help to stay below supply.  

    If there is possibility to keep the pull up resistor for PG pin then I would suggest to keep. 

    Schematic looks external components selection look okay to me. 

    Best regards,

    Tanvee 

  • 0 in reply to Tanvee
    Genius 3415 points

    Hi Tanvee,

    Thank you for your support.

    The customer wants to start mass production.

    Schematic modification is not possible.

    Can I use TPS62067-Q1 without changing the schematic?

  • +1 in reply to CHO SR
    TI__Genius 15290 points

    Hi,

    Yes, it is okay to use same schematic for TPS62067-Q1 with consider that PG pin will not get supply higher than AVIN.

    Thanks! 

    Best regards,

    Tanvee