LM34925: Difference between LM34925 and LM5018

Shuji Ishiwata

Part Number: LM34925
Other Parts Discussed in Thread: LM5018, , LM5019, LM34926

Hi All,

What is the difference between LM34925 and LM5018?
As far as I checked the data sheet, I think it is the same.
Customer is currently using the LM34925. What are the concerns and precautions when replacing with LM5018?

Best Regards,
Ishiwata

over 2 years ago

0 Daniel Li14 over 2 years ago

TI__Mastermind 27040 points

Both part have similar performance except OCP point, LM34925 can be replace directly by LM5019, for LM5018 customer need to taking care whether inductor will saturation in OCP statues.

0 Shuji Ishiwata over 2 years ago in reply to Daniel Li14

Mastermind 6480 points

Hi Daniel,

Thank you for your reply.
I have additional questions.

What is the difference between LM34926 and LM5018?
The current limit value is the same, but are there any other differences?

Best Regards,
Ishiwata

0 Daniel Li14 over 2 years ago in reply to Shuji Ishiwata

TI__Mastermind 27040 points

they are same performance, no difference.

Thanks

0 Shuji Ishiwata over 2 years ago in reply to Daniel Li14

Mastermind 6480 points

Hi Daniel,

Do you know why the product names are different?
Why are they separate products?

Best Regards,
Ishiwata

0 Daniel Li14 over 2 years ago in reply to Shuji Ishiwata

TI__Mastermind 27040 points

I don't know the reason, but from datasheet , it is same.

Thanks

0 Shuji Ishiwata over 2 years ago in reply to Daniel Li14

Mastermind 6480 points

Hi Daniel,

OK. I understand.
Thank you for your support.

Best Regards,
Ishiwata

+1 Daniel Li14 over 2 years ago in reply to Shuji Ishiwata

TI__Mastermind 27040 points

I will close this question, thanks

Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

Power management

Power management forum

LM34925: Difference between LM34925 and LM5018