This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

USB-PD-CHG-EVM-01: Flashing To The Hardware

Part Number: USB-PD-CHG-EVM-01
Other Parts Discussed in Thread: TPS25750, TPS25750EVM

Dear TI team

In the following forum topic, I was taught how to create an EEPROM to use when configuring the TPS25750D standalone.

I'm sorry I asked a lot of questions, but I have another question.

・How to flash EEPROM on a "USB-PD-CHG-EVM-01"
→"2.6 Flashing To The Hardware" in the "TPS25750 Application Customization Tool User's Guide" shows how to rewrite to the onboard EEPROM using the TPS25750EVM Configuration Tool.
This method cannot be used with "USB-PD-CHG-EVM-01" at present, and we recognize that it is a simple method for creating binary data.
First of all, is this recognition correct?
Also, are there any plans to apply the same method as "TPS25750EVM" to "USB-PD-CHG-EVM-01" in the future?

At the moment, we recognize that the easiest method for EEPROM on "USB-PD-CHG-EVM-01" is to use the I2C-EEPROM programmer as well as the method shown in the forum above.

Best Regards,