TPS63802EVM: Quiescent Current in PWM mode

Hi   Chandan,

the consumption both with PFM/PWM mode are make sense.

any question or concern about them?

the quiescent in the EC table is tested with device only, that means no consumption of external components and it will much lower than the test result on board.

during FPWM, IC keep switching all the time, that means we will got some switching loss and all functions internal all working. so the consumption will be much higher. With different input, the consumption will be different caused by different peak, RMS current and different working status.

Regards

Tao

Hi Tao,

Thanks for the reply and confirming the readings are inline with the expected behavior of the EVM circuit.

By looking at the difference between PFM and PWM mode consumptions, I was thinking there might be something which I am missing. Because the difference is huge, 25uA to 17mA.

Thanks,

Chandan N