Hi Team,
Can I use DFE252012P-2R2M=P2 inductor for TLV62569DBVR design? Please confirm.
regards,
James
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
Can I use DFE252012P-2R2M=P2 inductor for TLV62569DBVR design? Please confirm.
regards,
James
Hi James,
I checked the datasheet of the part number you mentioned. I do not see any problem in using this inductor.
In general, we recommend choosing the inductor based on its inductance value, DCR and saturation current. If these parameters are within the datasheet specifications, then there should not be any issue in the design.
Thanks!
Best regards
Sneha