REF3440: Please help share the low frequency noise(f=0.1Hz to 10Hz) test equipment which we used

Kygo Cheng

Expert 6830 points

Part Number: REF3440

Hi Team,

There is a good new that we could DIN REF3440 !

And there have one thing need your support!

Customer ask:

1. What the low frequency noise(f=0.1Hz to 10Hz) test equipment which we used. In REF3440 DS, it used below waveform to do the measurement and is 2uV/div. I assume is a high accuracy oscilloscope.

2.Please also help share the high frequency noise(f=10Hz to 10kHz) test equipment which we used, thanks.

over 2 years ago

0 Trailokya Rai over 2 years ago

TI__Genius 11301 points

Hi Kygo

I will share the details over the mail.

Regards

Trailokya

+1 Kygo Cheng over 2 years ago in reply to Trailokya Rai

TI__Expert 6830 points

Hi Trailokya Rai

Thank you , Looking for your reply .

0 Kygo Cheng over 2 years ago in reply to Kygo Cheng

TI__Expert 6830 points

Hi Trailokya Rai

More question,

1. How to produce 1000*10 gain from high pass filter and 10 from low pass filter?

2. For noise density, how to produce 11*11 from high pass filter?

3. Please help provide the part number of oscilloscope for flicker noise. Our oscilloscope has mV background noise and it can’t test uV noise.

4. Please help provide the part number of signal analyzer for noise density.

5. How to calculate PSD and what is the original signal we should measure? THX

0 Trailokya Rai over 2 years ago in reply to Kygo Cheng

TI__Genius 11301 points

Hi Kygo

I will share the details over mail :)

Regards

Trailokya

0 Kygo Cheng over 2 years ago in reply to Trailokya Rai

TI__Expert 6830 points

Hi Trailokya Rai

Thank you ,

Power management

Power management forum

REF3440: Please help share the low frequency noise(f=0.1Hz to 10Hz) test equipment which we used