BQ34110EVM-796: For Lead Acid Battery.

Ravi Teja

Prodigy 30 points

Part Number: BQ34110EVM-796
Other Parts Discussed in Thread: EV2400, BQSTUDIO

Hi Ti

> I am Using BQ34110EVM-796 attached to ev2400 and connected with BQ studio.

> My battery is LEAD Acid Battery 12V/12 AH.

> Using GPC i had received the ZIP File as attached ,as per SLUUB45B

Now How can i generate the GG file for this attached Zip file, so that i can directly update the data to data memory of BQ studio ?

8877.GPC_report.zip

over 1 year ago

0 Shirish over 1 year ago

TI__Guru 57747 points

Hello Ravi,

The report shows CEDV parameters resulting from the fit.

Use bqStudio data memory tab to set the parameter values in "CEDV Profile" under "Gas Gauging". Then export a GG file.

You can also edit the GG file in a text editor to use the values from the report.

0 Ravi Teja over 1 year ago in reply to Shirish

Prodigy 30 points

Hi Shirish

I had tried to enter the values in the data memory. but after entering the values i had clicked read all. then i am getting some error.

could you share me any reference .gg file of lead acid battery.

0 Shirish over 1 year ago in reply to Ravi Teja

TI__Guru 57747 points

Hello Ravi,

The error is shown at the bottom. Manufacture date is incorrectly set. You can fix this manually by writing that parameter in bqStudio.

The other red highlight items are an indicator that the values changed from the previous read. Since you imported the GG files, these values are expected to be different. Another "Read All" opertion will remove the red highlight.

0 Ravi Teja over 1 year ago in reply to Shirish

Prodigy 30 points

Hi Shirish

Thanks for reply, my issue is resolved

Problem: Using BQ studio i am Unable to flash the gas gauge parameters to the data memory of IC

Solution: By Pressing the commands UNSEALED and UNSEAL FULL ACCESS i am able to flash to data memory of IC.

+1 Ravi Teja over 1 year ago in reply to Shirish

Prodigy 30 points

Hi Shirish

Thanks for reply, my issue is resolved

Problem: Using BQ studio i am Unable to flash the gas gauge parameters to the data memory of IC

Solution: By Pressing the commands UNSEALED and UNSEAL FULL ACCESS i am able to flash to data memory of IC.

0 Shirish over 1 year ago in reply to Ravi Teja

TI__Guru 57747 points

Hello Ravi,

Good to know that your issue is resolved. Thanks for letting us know.

Power management

Power management forum

BQ34110EVM-796: For Lead Acid Battery.