LMZ30606: minimum load

guy lemire

Part Number: LMZ30606
Other Parts Discussed in Thread: TPSM82866A

Hello,

does the LMX30606 require a minimum load? For example would adding a 10k or a 1k resistor between VOUT and GND help to keep the regulator stable when the load is very light.

Regards,

Guy

over 1 year ago

0 Chris Glaser over 1 year ago

TI__Guru*** 142730 points

Hi Guy,

No, there is not a minimum load.

In any case, did you already take a look at the newer, smaller, cheaper TPSM82866A?

Thanks,

Chris

0 guy lemire over 1 year ago in reply to Chris Glaser

Intellectual 950 points

Hi Chris,

i looked briefly and it looks like a good fit for our new designs.

Thank you for your response

Regards,
Guy

Power management

Power management forum

LMZ30606: minimum load