TLC6C5748EVM: About the LED mounted on the evaluation board

Kaji@PAN

Part Number: TLC6C5748EVM

Hello,

I have a question about the evaluation board.
Although it is stated in the specifications that a white LED is mounted, the actual product emits orange light as shown in the photo.
Is this the same as the part described in the specifications?
If they are different, Vf and If are required, so can you tell me the part number?

Best regards,

over 2 years ago

0 Zhiqian Wu over 2 years ago

TI__Mastermind 22635 points

Hi, Kaji

There are might be some difference between SCH and the board because of the shortage of semi-conduct.

0 Kaji@PAN over 2 years ago in reply to Zhiqian Wu

Mastermind 7280 points

I'm FAE, a Japanese distributor of TI products.
Please tell me the model number of the LED currently mounted on the EVM, as I need to explain to my customer.

0 Zhiqian Wu over 2 years ago in reply to Kaji@PAN

TI__Mastermind 22635 points

Hi, Kaji

Can you explain why customer focus on this part number?

I need to check it with others and reply it late.

0 Kaji@PAN over 2 years ago in reply to Zhiqian Wu

Mastermind 7280 points

As mentioned at the beginning, if the VF and IF of the mounted LED are unknown, the range that can be evaluated by EVM is unknown.
Since my customer's evaluation is not progressing, I hope that you will provide information as soon as possible.

+1 Zhiqian Wu over 2 years ago in reply to Kaji@PAN

TI__Mastermind 22635 points

Yes, you can use the same VF and IF

Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

Power management

Power management forum

TLC6C5748EVM: About the LED mounted on the evaluation board