Hi,
Our customer is using VLED = 3.934V.
At this time, Vp-p of VLED becomes about 150mV or about 330mV according to the Duty of PWM.
Is this Vp-p value normal for device operation?
(Satisfies VSAT_max)
Best Regard
Nishie
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
Our customer is using VLED = 3.934V.
At this time, Vp-p of VLED becomes about 150mV or about 330mV according to the Duty of PWM.
Is this Vp-p value normal for device operation?
(Satisfies VSAT_max)
Best Regard
Nishie
Hi Nishie-san,
I am not following exactly on this problem. Plz send me an email (aaron-bing@ti.com) with some detailed info of VLED waveforms and register configuration.
Best Regards,
Aaron
Hi Aaron-san,
Thank you for your reply.
I am checking the register configuration with the customer.
I will send an email after getting the information.
Best Regards,
Nishie
Hi Nishie-san,
Ok. I am looking for your email communication.
Best Regards,
Aaron
Hi Aaron-san,
Sorry.
I am unable to send an email because I have not received any information from customer.
I hope you can wait a little longer.
Best Regards,
Nishie
Hi Nishie-san,
No worry. Certainly, I can wait for customer's feedback on this issue :)
Best Regards,
Aaron