This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS57060-Q1: PSPICE for TI simulation error

Part Number: TPS57060-Q1


I'm a newbie to PSPICE for TI and I'm simulating a circuit with the TPS57060-Q1 chip. I keep getting the following error:

"WARINING(ORCAP-2445): Instance U1: SCHEMATIC, PAGE1 (2.50,1.40), not found in the configured libraries." 

I have tried to reinstall TI Models and Libraries from the help menu but the problem doesn't resolve. 

  • Hello Adinbo,

    While I haven't experienced this problem myself, I would recommend in your current schematic, to delete the instance of U1, then from the top menu bar, select place and select part. Navigate to TI components and locate TPS57060 and place in schematic. Save schematic and try and run.

    In addition, I would confirm that you're updating PSPICE if you get a notification upon PSPICE startup that their is an update available.