Hello team,
I receive a question from the customer.
Is it possible to use 10k ohm for RPROT? In datasheet recommend to use 5k ohm.
Let me know what you think.
Regards,
Masa
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello team,
I receive a question from the customer.
Is it possible to use 10k ohm for RPROT? In datasheet recommend to use 5k ohm.
Let me know what you think.
Regards,
Masa
Hi Masa,
The digital I/O for IC uses up to 20uA of current, and 10k resistor will not cause too much voltage drop and should be fine in this case.
Regards,
Yichi