hi, team,
customer is udnerstand dynamically changing the mode from FPWM to auto mode, so they would like to konw max/min of this time.
ny
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
We dont have an EC specification guarantee fpwm and auto mode transition. Many customers have no issue with the transition time and the product is marketed as being able to "switch on the fly."
My recommendation is for the customer to evaluate in their system to see if the performance is acceptable.
Hi Beck-san
Thank you for your reply. If you can, could you show us any waveform?
We want to know any concern about changing switching mode dynamically.
Because we use power line communication by this power, so any ripple cause unpredicted failure.
Pls give us kind corporation.
Hello Yamamoto-san,
you are welcome.
Can you provide the conditions under which you would like this experiment to be validated?
Hi,Beck-san
Thank you for reply and your kindnedd.
Please refer below condition.
-VIN:36V
-VOUT:8.3V
-ILOAD:100mA
Hello Yamamoto-san,
Will take a look into this. Give us some time to get back.